Page 1 of 1
Dilemas!
Posted: Fri Jun 27, 2008 7:57 pm
by bwgan
So, about to order my pipe work and came across a cheaper site than Richdon (Coastal Koi). Where do you order from is the dilema? Save money now or spend the money and get koi points?
Re: Dilemas!
Posted: Fri Jun 27, 2008 10:17 pm
by site admin
Hi,
So long as it the same class 'C' pipe go with the cheaper, also it depends on how much you are saving and if you are going use the points to stock your pond!
Dave.
Re: Dilemas!
Posted: Sat Jun 28, 2008 2:58 am
by bwgan
Ok, I've ordered some bits tonight and put the same amounts into the shopping baskets at Richdon and Costal Koi. The prices were quite amazing
2 X 1" pressure pipe
2 X 4" pressure pipe
3 X 45 deg 1"
3 X 45 deg 4"
1 X 4" ball valve
1 X cement
1 X silicone sealer
Coastal koi - £199.21
Richdon - £238.86
Re: Dilemas!
Posted: Sat Jun 28, 2008 8:45 am
by site admin
Hi Paul,
The difference is only about £16 when you subtract the £23 you get to buy a Koi!
Dave.
Re: Dilemas!
Posted: Sun Jun 29, 2008 7:48 am
by bwgan
Thats what my dilema was about. I'm happy as the way things are going its going to be a while before I even think about fish! And when I do its only going to be little tad pole sizes!
I want sleep!!!!!!!!

Re: Dilemas!
Posted: Wed Jul 02, 2008 6:44 pm
by bwgan
My bits came today, I cannot believe how big/heavy the 4" ball valve is!
I'm off out to glue some bits!!!!
Reinforcing for concrete comes tomorrow then should be able to concrete the base this weekend!!!

Re: Dilemas!
Posted: Wed Jul 02, 2008 8:40 pm
by site admin
Hi Paul,
You better not get to the finish line before me,
Glad to hear things are coming together.
Try and find a way of sitting the ball valve on something or get some brackets, do not let the pipework support it
Dave.
Re: Dilemas!
Posted: Wed Jul 02, 2008 8:44 pm
by bwgan
Cheers for that Dave, still a mile away from plumbing it all in. Was going to collect the filter tonight as the wife is going up to her mothers but her car has a flat battery and had to take mine
I welded in the 4" into BD and the air pipe. That stuff goes off flaming quick. I could only push the pipe in 3/4's of the way into the BD and then it was solid.
